Mtd Yard Machine Mower Parts

Review by J. Yeagley : Exact Fit For My Thrower

I have a Troy-Bilt, but there are obviously many brands that change the color of the plastic and sell it as their own. The owner's booklet listed the belt part number, I found it here on Amazon for about half the price of a local purchase. After reading my booklet further, I found there was an adjustment to the cable that engages the blower, so I made this adjustment and now this belt is my spare. You might want to check if your machine has 2 holes in the lever on the handle like mine. It took all of 30 seconds to move the cable to the other hole! Still wouldn't hurt to have a belt when you're ready for it, though.

Review by SD : Good Belt

It worked fine on my MTD snowblower. I did adjust the Clutch wire to the lower hole on the clutch handle. I think that is a better setting for a new belt. When a belt wears off and/or starts slipping at this setting I will move it to the tighter setting. It is really a good product at a very good price.

Review by J. Desiata : Rotary Replacement Belt

The belt did what it was supposed to do so it met my expectations. The better part was the vendor who without any additonal charge shipped the belt from the West Coast to Pennsylvania in 3 days.

Review by hak : Replacement belt for MTD #954-0101A / 754-0101A

The belt broke on my snow blower and the local stores were out of them. I bought a belt from an auto supply dealer but it was not the correct thickness (too loose) and did not work properly. I ordered the one from Amazon because it was much less expensive than other belts I found online. When the one from Amazon arrived I noticed the difference in thickness immediately and assumed it was the correct belt. The next time it snowed I used it and it was ALMOST perfect but not quite. The more expensive ones which did not say they were 'replacements' were probably a better fit. If this belt lasts as long as the original belt, I will be living where it doesn't snow the next time I need a belt.

Review by Mark j Fedorov : Did the job at 1/2 the price

Got it for my (old) snow thrower. This was the part number that was in the manual, I got two so I have one spare. Have not touched the spare yet.

Review by DJA : The same as OEM for half the price.

The title says it all. I priced the MTD belt at a local big box and it was more than twice the cost of this. This part appears to be of equal quality so I'm happy to keep the savings.